|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Technical Data Sheet POWER LED @150mA Current 30-02UYC/S599 Benefits . Fewer LEDs Required . Lowers Lighting System Cost . Viewing angle 50 Features . High Flux Output. . Designed for High Current Operation. . Low Thermal Resistance. . Low Profile. . Packaged in Tubes for Use with Automatic Insertion Equipment. . The product itself will remain within RoHS compliant version . ESD-withstand voltage: up to 4KV Descriptions This revolutionary package design allows the light designer to reduce the number of LEDs required and provide a more uniform and unique illuminated appearance than with other LED solutions. This is possible through the efficient optical package design and high-current capabilities. The low profile package can be easily coupled with reflectors or lenses to efficiently distribute light and provide the desired light appearance. Applications . Automotive Exterior Lighting . Electronic Signs and Signals . Special Lighting application Device Selection Guide PART NO. 30-02UYC/S599 Chip Material AlGaInP Emitted Color Yellow Lens Color Water Clear Everlight Electronics Co., Ltd. Device number: DLE-320-002 http:\\www.everlight.com Established date: 06-22-2007 Rev. 2 Page: 1 of 7 Established by: Jim Lin Technical Data Sheet POWER LED @150mA Current 30-02UYC/S599 Package Dimensions Notes: 1.All dimensions are in millimeters 2.An epoxy meniscus may extend about 1.5mm(0.059") down the leads 3.Tolerances unless dimensions 0.25mm Absolute Maximum Ratings (Ta=25+) Parameter Continuous Forward Current Peak Forward Current(Duty 1/10 @ 1KHZ) Reverse Voltage Operating Temperature Storage Temperature Soldering Temperature(T=5 sec) LED Junction Temperature Power Dissipation Electrostatic Discharge Everlight Electronics Co., Ltd. Device number: DLE-320-002 Symbol IF IFP VR Topr Tstg Tsol Tj Pd ESD http:\\www.everlight.com Established date: 06-22-2007 Rating 150 200 5 -40 ~ +85 -55 ~ +100 260 5 125 400 4K Rev. 2 Units mA mA V + + + + mW V Page: 2 of 7 Established by: Jim Lin Technical Data Sheet POWER LED @150mA Current 30-02UYC/S599 Electro-Optical Characteristics (Ta=25+) Parameter Total Flux Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current VF IR 2 Symbol v 1/2 p d Min. 9000 ------585.5 ---1.9 ---Typ. 11000 50 591 590 15 2.3 ---Max. 18000 ------594.5 ---2.9 10 Condition IF=150mA IF=150mA IF=70mA IF=70mA IF=70mA IF=150mA VR=10V Unit mlm deg nm nm nm V uA Rank 30-02UYC/S599 (1) VF(V) Bin L M N P Q Min 1.9 2.1 2.3 2.5 2.7 Max 2.1 2.3 2.5 2.7 2.9 (1) (2) (2) d(nm) (3) (3) v(mlm) Max 587.0 588.5 590.0 591.5 593.0 594.5 Bin U V W Min 9000 11250 14250 Max 11250 14250 18000 Bin 2 3 4 5 6 7 Min 585.5 587.0 588.5 590.0 591.5 593.0 *Measurement Uncertainty of Forward Voltage'0.1V *Measurement Uncertainty of Luminous Intensity: 15% *Measurement Uncertainty of Dominant Wavelength 1.0nm Everlight Electronics Co., Ltd. Device number: DLE-320-002 http:\\www.everlight.com Established date: 06-22-2007 Rev. 2 Page: 3 of 7 Established by: Jim Lin Technical Data Sheet POWER LED @150mA Current 30-02UYC/S599 Typical Electro-Optical Characteristics Curves Relative Intensity vs. Wavelength 1.00 150 Forward Current vs. Forward Voltage RELATIVE INTENSITY Forward Current (mA) 120 0.50 90 60 30 0.00 540 0 560 580 600 620 WAVELENGTH (nm) 640 1.6 1.8 2.0 2.2 2.4 Forward Voltage (V) Relative Intensity vs. Forward Current 1.0 Forward Current vs. Ambient Temp. 160 140 0.8 Forward Current(mA) 120 100 80 60 40 20 0 0 20 40 60 80 O Relative Intensity 0.6 0.4 0.2 0.0 0 20 40 60 80 100 120 140 100 Forward Current (mA) Ambient Temperature Ta( C) Relative Intensity vs. Angle Displacement R E L A T IV E IN T E N S IT Y Relative Intensity vs. Off Axis Angle 1.00 -4 0 40 R ELATIVEIN TEN SITY -2 0 0 20 0.50 -6 0 60 -8 0 80 0.00 -90 1 .0 0 .8 0 .6 0 .4 0 .2 0 .0 0 .2 0 .4 0 .6 0 .8 1 .0 -60 -30 0 30 60 90 VIEWING ANGLE (DEGREE) Everlight Electronics Co., Ltd. Device number: DLE-320-002 http:\\www.everlight.com Established date: 06-22-2007 Rev. 2 Page: 4 of 7 Established by: Jim Lin Technical Data Sheet POWER LED @150mA Current 30-02UYC/S599 Packing Quantity Specification (1) 60 pcs/1 tube, 30 tubes/1 small inside box, 12 small inside boxes/1 outside box (2) 60 pcs/1 tube, 105 tubes/1 big inside box, 4 big inside boxes/1 outside box Label Form Specification (1)Tube Label Form PART NO: 30-02UYC/S599 LOT NO: QTY: 60 CAT: (2)Box Label Form EVERLIGHT CPN: P/N: RoHS 30-02UYC/S599 QTY' LOT NO' MADE IN TAIWAN CAT: HUE: REF: PART NO: Everlgiht's Production Number QTY: Packing Quantity LOT NO: Lot Number CAT: Ranks of Forward Voltage, Dominant Wavelength and Total Flux CPN: Customer's Production Number P/N : Production Number HUE: Reference REF: Reference MADE IN TAIWAN: Production Place Everlight Electronics Co., Ltd. Device number: DLE-320-002 http:\\www.everlight.com Established date: 06-22-2007 Rev. 2 Page: 5 of 7 Established by: Jim Lin Technical Data Sheet POWER LED @150mA Current 30-02UYC/S599 Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don't reproduce or cause anyone to reproduce them without EVERLIGHT's consent. 4. Below the zener reference voltage Vz, all the current flows through LED and as the voltage rises to Vz, the zener diode "breakdown." If the voltage tries to rise above Vz current flows through the zener branch to keep the voltage at exactly Vz. 5. When the LED is connected using serial circuit, if either piece of LED is no light up but current can't flow through causing others to light down. In new design, the LED is parallel with zener diode. if either piece of LED is no light up but current can flow through causing others to light. Everlight Electronics Co., Ltd. Device number: DLE-320-002 http:\\www.everlight.com Established date: 06-22-2007 Rev. 2 Page: 6 of 7 Established by: Jim Lin Technical Data Sheet POWER LED @150mA Current 30-02UYC/S599 6. Soldering Condition Careful attention should be paid during soldering. When soldering, leave more then 3mm from solder joint to case, and soldering beyond the base of the tie bar is recommended. Avoiding applying any stress to the lead frame while the LEDs are at high temperature particularly when soldering. Recommended soldering conditions: Hand Soldering Temp. at tip of iron Soldering time Distance 400+ Max. (30W Max.) 3 sec Max. 3mm Min.(From solder joint to case) Distance 3mm Min. Preheat temp. Bath temp. Bath time. DIP Soldering 100+ Max. (60 sec Max.) 265 Max. 5 sec Max. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http:\\www.everlight.com Everlight Electronics Co., Ltd. Device number: DLE-320-002 http:\\www.everlight.com Established date: 06-22-2007 Rev. 2 Page: 7 of 7 Established by: Jim Lin |
Price & Availability of 30-02UYC |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |